Separator: To separate the sticky cakes into several layers, the finished products may blocks or panels.

Cross cutting: followed by horizontal cutting, it is cross cutting area. The cake will be cut in vertical as required value.

Tilting hoister: After pre-curing, the mould will be transferred to tiling area, the hoister should grasp mould to rotate it with 90 degrees, then the clamping arm controlled by hydraulic motor will loosen to put side plate and cake together on the cutting cart. Then the empty mould frame will be send back to the side plate conveyor line, to assemble with a free side plate, to become a complete mould and ready for the next pouring processing.

Wax-dipping lifting device: Assembled steel frames with steel pins together to be lifted by this device, dipping into wax, it will help to prevent steel pins from sticky material when drawing from mould.

Mesh assembly frame conveyor line: this line consists mesh assembly frame rack, mesh assembly frame ferry cart and other related devices. The line is a circulation transmission system.