English
العربية
Français
Pусский
Español
Bahasa indonesia

Home » Solution&Production

  Flow Chart of AAC Production

Not just an equipment manufacturer
But a project general contractor as well

   AAC Production Process Sections

This browser does not support the video element.
Raw Material Processing Section
The raw material preparation section focuses on the processing and storage of raw materials,including several machines like jaw crusher, ball mill, bucket elevator, etc. Each machine is perfectly integrated into the production line.
 
   Automatic Steel Mesh Fabricating 
& Circulating Section
This section is responsible for fabricating steel mesh (cage) required for the panels, as well as manual or automatic mesh hanging and the automatic circulation of the assembly frame.
The reinforced steel mesh is produced and inserted into slurry of mould,which is strengthed the hardness of AAC panel products.

This browser does not support the video element.

This browser does not support the video element.
  Batching & Pre-Curing Section
In this section, raw materials are mixed into a pouring mixer and then poured into mould. During the production, the steel mesh is inserted into the slurry by pin-inserting hoister, and the mould is transported to the pre-curing room via a ferry cart. The slurry will form into the green cake by foaming and hardening. Subsequently, the mould transports the green cake to the cutting section by pre-curing ferry cart, withdrawing the inserted mesh holding beans at the same time.
   Cutting Section
This is the core section during the AAC block and panel production. The mould with green cake is demoulded by tilting hoister, and the green cake along with side plate are placed on a cutting cart, shaped through the process of profile cutting, horizontal cutting and vertical cutting. Bottom waste is removed by tilting table and scraper, then recycled. At last, the green cake is loaded by hoister and ferry cart.

This browser does not support the video element.

This browser does not support the video element.
                          Autoclaving Section
The grouped green cakes are sent into the autoclave for constant pressure curing by traction mechanism and ferry carts. Once the autoclaving is completed, the products will be pulled out of the autoclave by the ferry cart and transported to the finished products packing section.
 
 
  Finished Products Packing Section  
This section handles the sorting, stacking, packaging, and transportation to storage yard of white cakes, which have been separated after autoclave.

This browser does not support the video element.

Contact Us

The main product of TEEYER is the whole line equipment for AAC block and panel production. TEEYER aims to provide customers with satisfactory overall solution for wall material products.

Information

 Tel: +86-13861131181
 Address: No.312 West Hehai Rd, Hi-tech Zone, Changzhou City, Jiangsu Province, China.

Copyright© 2022 Jiangsu Teeyer Intelligent Equipment Co., Ltd. All Rights Reserved. Support by Leadong｜Sitemap